Fujitsu Primergy RX100 S3 User Manual

75
PRIMERGY RX100 S3 User’s Guide
3
OS Installation Using ServerStart
3.2.3 Close/save the Configuration File
When settings in all wizards are completed, save the configuration file.
1 Click [Close and save Configuration File].
The [Save ServerStart Configuration File] window appears.
2 Click [Save As].
The [ServerStart Session IP Settings] window appears.
3 Set items when performing remote installation.
4 Click [Set].
The configuration file is saved.
 You can specify any name for the configuration file. However, OS installation is possible only when it is
saved as "SerStartBatch.ini". When installing the OS, make sure to save it as "SerStartBatch.ini" on
the ServerStart floppy disk.

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English