Fujitsu Primergy RX100 S3 User Manual

266
Chapter 9 Operation and Maintenance
9.6.2 For Windows 2000 Server
● Items Required
• Windows 2000 Server CD-ROM
• Windows 2000 Server system recovery disk (created beforehand)
1 Insert the Windows 2000 Server CD-ROM after turning on the server.
Check that there is not already a floppy disk inserted in the floppy disk drive at this time.
2 From the [Welcome to Setup] window of the Windows 2000 Server Setup
program, press the [R] key to select restoration.
3 Follow the message on the setup window to restore the system.
Notes on system restoration
 The system may return to the initial installation conditions depending on the restoration information
used. In this case, the system must be configured after system restoration.
 Windows 2000 Server may have to be reinstalled if system files or system information are severely
damaged. If this is the case, reinstall it. Refer to "9.7 Reinstalling the OS" (pg.267).
 The message "The file ******.*** is not the original file copied when Windows 2000 was installed."
appears during file restoration. Press the [Enter] or [A] key to restore the file.

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English