259
PRIMERGY RX100 S3 User’s Guide
9
Operation and Maintenance
9.4.2 Security against Unauthorized Use
A password can be set to prevent unauthorized use of the server.
When a password is set, the server is accessible only to the users who know the password.
■ Password Types
The following two types of password can be set in this server.
The password types define the privileges of server operations.
● Setup Password (administrator password)
This is the password that allows specific people to access the BIOS setup. Unless the set password is
entered, the BIOS Setup Utility and the OS cannot be started up.
● System Password (user password)
This is the password that allows specific people to use the server. Unless the set password is entered, part
of the BIOS Setup Utility and the OS cannot be started up.
■ Setting a Password
The password is set in the BIOS Setup Utility. For details on the BIOS Setup Utility, refer to "8.1.11
Security Menu" (
pg.216).
1 Start the BIOS Setup Utility.
"8.1.1 Starting and Exiting the BIOS Setup Utility" (pg.202)
2 Use the [←] [→] keys to select [Security] from the [Main] menu.
The [Security] menu appears.
3 Use the [↑] [↓] keys to move the cursor to [Set System Password] or [Set Setup
Password], and press the [Enter] key.
The password entry window appears.
4 Enter the password (up to 6 characters) in the [Enter New Password] field.
5 In the [Confirm New Password] field, enter the password you have entered in
Step 4 and press the [Enter] key.
[System Password] or [Setup Password] on the [Security] menu shows [Installed].
Set Setup(System) Password
Enter New Password [ ]
Confirm New Password [ ]
To Next Page
Loading...
Need help?
General