Fujitsu Primergy RX100 S3 User Manual

47
PRIMERGY RX100 S3 User’s Guide
2
Checking before OS Installation
2.3.5 Expansion Cards Supported by ServerStart
ServerStart supports automatic driver installation for the following expansion cards.
2.3.6 Cautions for Manual Installation
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to"5.1 Memory Dump/Paging File Setting" (
pg.134).
■ Installing Windows 2000 Server
To install Windows 2000 Server directly, you have to use Service pack 4 integrated OS media or install
Service Pack 4 or newer Service Pack.
And please install hotfix module named KB904374 after OS installation.
Please find out hotfix module of your language version from the following folder on ServerStart CD.
[CD-ROM drive]: \HOTFIX\W2K\
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts automatically.
For background operations, refer to "Onboard SCSI RAID User’s Guide".
table: Automatic Expansion Card Driver Installation
Name Model Bus
Onboard FDD/IDE - -
Onboard LAN -
PCI-E
Onboard VGA - PCI
LAN Card PG-1852 PCI
PG-1862 PCI
PG-1882L
PCI
PG-1892L PCI
SCSI Ctrl U160 lp
PG-1301L
PCI

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English