Fujitsu Primergy RX100 S3 User Manual

53
Chapter 3
OS Installation Using
ServerStart
This chapter explains how to install the OS in the
server using ServerStart.
3.1 Guided Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3.2 Preconfiguration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 71
3.3 Expert Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
3.4 Remote Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
3.5 Installation on Multiple (the Second and Subsequent) Servers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English