EasyManuals Logo
Home>Garmin>Avionics Display>G1000

Garmin G1000 Line Maintenance Manual

Garmin G1000
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100 Page 7-37
190-02102-00 Rev.4
Figure 7-15. GWX Configuration Complete Prompt
Figure 7-16. GWX Configuration Complete (Set = Active)
7.11 GFC 700 TESTING
The following procedure will make sure the proper operation of the GFC 700 AFCS. The
technician performing these checks must be thoroughly familiar with the GFC 700, refer
to the Garmin G1000 Kodiak 100 Pilot's Guide.
7.11.1 Preflight Test
1. If selected ON, select the MASTER and AVIONICS MASTER PWR switches to
OFF. After 30 seconds select the MASTER and AVIONICS MASTER PWR
switches to ON. Ensure the GFC 700 begins an automatic pre-flight test after
AHRS and ADC parameters become valid.
2. Make sure a white 'PFT' annunciation is displayed on PFD1 and PFD2.
Uncontrolled if Printed

Table of Contents

Other manuals for Garmin G1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin G1000 and is the answer not in the manual?

Garmin G1000 Specifications

General IconGeneral
BrandGarmin
ModelG1000
CategoryAvionics Display
LanguageEnglish

Related product manuals