______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100 Page 3-25
190-02102-00 Rev.4
3.8.1 Crossfill Troubleshooting
1. Possible causes of a failure for this include the following:
a) An LRU is not online or is not connected to the uploading LRU.
b) An LRU is configured and should not be.
2. Possible Corrections for a failure are:
a) Turn on the offline device.
b) Check the LRUs configured and see if one is configured and should not be so.
3. Possible causes for a timeout include the following:
a) A connected device is not in config mode (either because it was never in
config mode, or because it did not restart in config mode after a software
upload).
b) Something else is preventing registry tags from appropriately cross-filling to at
least 1 other device
c) Not all LRUs have the same software version
4. Possible corrections for a timeout include the following:
a) Ensure that all configured LRUs are on, and in config mode.
b) Ensure that all online LRUs can be seen by the uploading device on the
network (The System Status page on the uploading device should show which
ones it detects on the network.)
c) Ensure that all LRUs have the same software version.
5. If timeout problems persist:
a) Pay special attention to the LRUs listed as being unsynced when the user
cancels the monitoring process (see ‘User cancels after timeout’ above).
b) If after several attempts, the same LRU or LRUs are listed as being unsynced,
it is likely there is something preventing those devices from cross-filling.
Double check that they are in config mode, and have the same software
version as the other LRUs.
c) If after several attempts, different/random LRUs are listed as being unsynced,
it is likely that there is a registry tag that is changing too fast to ever be
detected as 'synced'. For the technician, this means it is likely that crossfill
has truly completed, and there is just one or a small number of tags that are
changing quickly.