Garmin G1000 Line Maintenance Manual

______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100 Page 3-31
190-02102-00 Rev.4
8. Press the Set GTS softkey (if present) and acknowledge the PFD1 prompt by
pressing the ENT key
9. Deactivate the cursor.
10. Turn large FMS knob to select GTX 3X5 configuration page group.
11. Turn the small FMS knob to select Transponder Airframe Config page.
12. Make sure the GTX 3x5 - #1 box at the top of the page is checked green and the
tail number, ICAO address, and VFR code that were entered previously are cor-
rect.
3.12.2 Fuel Flow Configuration
Shadin Transducer
1. Locate the number stamped on the transducer data tag (the number will between
34 and 46).
2. Multiply the number by 1000 (XX multiplied by 1000 = XX000).
Electronics International Transducer
1. Locate the number engraved on the transducer.
2. Multiply the number by 1000 (XX.XXX multiplied by 1000 = XXXXX).
Uncontrolled if Printed

Garmin G1000 Specifications

General

Brand	Garmin
Model	G1000
Category	Avionics Display
Language	English