Prepare the System for Use
3-52 Vivid S70 / S60 – User Manual
BC092760-1EN
01
3. When ready to use the system plug the AC cable to a power
socket.
The system turns ON and is ready to use within a few
seconds.
Transportation mode following abrupt power interruption
While the system is operating and the AC power is interrupted or
AC power plug is disconnected, the system enters
Transportation mode as described above.
Transporting the system
Take extra care when transporting the system by vehicle. In
addition to the moving precautions listed under ‘Moving the
system’ on page 3-48, follow the procedure described below.
1. Disconnect all probes and secure them in their boxes.
2. Lower the system's keyboard to its minimum height.
3. Park the vehicle on a level surface for loading and
unloading.
4. Secure the system while it is on the lift, to prevent rolling. Do
not attempt to hold it in place by hand. Cushion the system
and strap the lower part so that it does not break loose.
5. Ensure that the system is secured inside the vehicle. Secure
it with straps to prevent movement while in transit.
6. Drive cautiously to prevent vibration damage.
To Next Page
Loading...
Need help?
General
