Measurement Package
Vivid S70 / S60 – User Manual 12-39
BC092760-1EN 01
Figure 12-23. The Normal value window
4. In the Normal value window:
• Select the Normal value type (Range, Above or Below).
• Type in the Normal value.
• Optionally enter a reference for the Normal value.
5. Select OK.
The Normal value is displayed in the Measurement menu
sheet.
To display Normal values and references in the Report, the
Report template must be configured to show Normal values
(‘Inserting a measurement container’ on page 11-35).
Measurements outside the Normal value are highlighted with an
“!” in the report.
Transfer of user-defined measurements transfer in DICOM SR
Within a DICOM Server dataflow, it is possible to transfer
user-defined measurements in DICOM SR. DICOM Mapping for
the user-defined measurements can be configured in Utility ->
Config -> Meas/Text -> DICOM Mapping.
To Next Page
Loading...
Need help?
General
