Measurements and Analysis
8-66 Vivid S70 / S60 – User Manual
BC092760-1EN
01
By creating several control points the sampling path can be
bent to follow the myocardium.
8. Press Select twice to end the sampling path.
9. Create a sampling path in scan plane 2 and 3.
A TSI color coded surface model is displayed in the
Geometric model.
10. To create a dynamic model, scroll to another frame in the
same heart cycle and create a sampling path in each scan
plane.
11. Press 2D Freeze to run the model.
To edit the sampling path
1. Place the cursor over a control point.
2. Press Select twice (double-click) and move the control point
to a new position using the trackball.
3. Press Select to place the control point to its new position.
To Next Page
Loading...
Need help?
General
