September 2007
6-44 General Programming
TERMINAL Option The Terminal option lets you enable or disable all error handling for a
terminal or PC connected to the XMO2 via its RS-232 serial port. To
use this option, proceed as follows:
This completes the prompts for the Terminal? option, and the XMO2
returns to the Set Error Handling? menu.
mA OUTPUT Option The mA Output option lets you enable or disable all error handling for
the XMO2’s 4-20 mA analog output. To use this option, proceed as
follows:
Based on the above selection, go to the appropriate section.
If Disable was selected:
This completes the prompts for the mA Output? option.
You may now program other Set Error Handling? options, you may
proceed to any other desired programming task, or you may return to
taking live readings.
SET ERROR HANDLING
Press [Y] or [Enter] to enter the
Terminal? menu, or press
[N] to
move to the next Set Error
Handling? option.
Terminal?
Enable/Disable All Terminal Errors
Press [N] to select the desired
response. Then, press
[Y] or
[Enter] confirm your choice.
disable [ENABLE]
SET ERROR HANDLING
Press [Y] or [Enter] to enter the
mA Output? menu, or press
[N] to
move to the next Set Error
Handling? option.
mA Output?
Enable/Disable All mA Output Errors
Press [N] to select the desired
response. Then, press
[Y] or
[Enter] confirm your choice.
disable [ENABLE]
SET ERROR HANDLING
Press [Y] or [Enter] to re-enter the
mA Output? menu, or press
[N] to
move to the next Set Error
Handling? option.
mA Output?
To Next Page
Loading...
Need help?
General
