Specifications and Factory Data 8-3
September 2007
Physical Specifications Wetted Sensor Materials:
Standard: 316 SS, glass, w/Viton™
o-rings
Optional: Hastelloy, Monel, or Titanium w/Chemraz™ o-rings
Dimensions (height x diameter):
Weatherproof unit: 9.53 x 5.71 in. (242 x 145 mm)
Explosion-proof unit: 10.47 x 5.71 in. (266 x 145 mm)
Weight:
9.5 lb (4.3 kg)
Connections:
Electrical: 3/4 in. NPTF conduit and 6-terminal, removable connector
Process: 1/4 in. NPTF inlet and outlet.
Environmental:
Weatherproof: NEMA TYPE 4X; IP66
Explosion-proof: Class I, Div. 1, Groups A,B,C,D,
FM File No. J.I.2Z4A8.AE (3615);
CSA LR44204-15
CENELEC
Flameproof: II 2 GD EEx d IIC T6 or T5
ISSePO2ATEX022
Ex d II C T6 IP66 Class I, Zone 1
SAA AUS Ex 3139X
CE: EMC Direct. 89/336/EEC
PED 97/23/EC
Lloyd’s Registry approval
Optional Accessories GE Sensing offers a complete line of optional accessories for use with
the XMO2 transmitter. These include:
• PS5R-C24: 24 VDC power supply
• X4(*): 4-conductor cable for power input and analog output
connections (* specifies length in feet)
lengths up to 450 ft (137 m) are available
• 704-(667, 668, 669, or 670)-*: 3-conductor cable for digital output
connections (* specifies length in feet)
DB9 male, DB9 female, DB25 male, and DB25 female connectors
are available
The XMO2 can also be interfaced with other Panametrics displays
and analyzers, such as:
• TMO2D, LDP, and XDP display/control modules
• Moisture Image/Monitor Series 1, 2, and 3 Analyzers
• System 1 Analyzer
To Next Page
Loading...
Need help?
General
