98
4. CONFIGURATION
4.15.4. ST.EN.N - Setting assigned consent number
Acronym Scrolling message Submenu Attributes
ST.EN.N ENABLE NUMBER I.DIGT R W
The parameter shows and sets the consent number assigned to the digital input identified by I.DIG.N.
The parameter appears if the parameter F.in.x = ST.ENB.
Unit of measurement: Number
Options: 1...4
4.15.5. MSG.IN - Selecting the digital input message
Acronym Scrolling message Submenu Attributes
MSG.IN NUMBER OF SCROLLING MESSAGE AT INPUT ACT I.DIGT R W
The parameter shows and sets the number of the message assigned to activation of the digital input, i.e., the scrolling
message shown on the display.
For more information on scrolling messages, see paragraph “3.1.2.2. Scrolling messages” on page 34.
If the parameter is set to “0” no message will be displayed when the digital input is activated.
The same message number can be assigned to different inputs.
Unit of measurement: Message number
Options: 0...25
To Next Page
Loading...
Need help?
General
