94
4. CONFIGURATION
4.14.6. H.P.LO - Minimum limit of heating power
Acronym Scrolling message Submenu Attributes
H.P.LO HEATING POWER LOW LIMIT PID.GR R W
The parameter shows and sets the minimum limit of heating power.
For details, see paragraph “4.13.12. H.P.LO – Minimum limit of heating power” on page 87.
Unit of measurement: %
Options: 0.0...100.0
4.14.7. C.PB - Proportional cooling band or hysteresis in ON-OFF control
Acronym Scrolling message Submenu Attributes
C.PB COOLING PROPORTIONAL BAND OR ON/OFF HYST PID.GR R W
The parameter shows and sets the proportional cooling band or hysteresis in the ON-OFF control, calculated as a per-
centage of full scale of the main input.
Unit of measurement: %
Options: 0.0...999.9
4.14.8. C.IT - Integral cooling time
Acronym Scrolling message Submenu Attributes
C.IT COOLING INTEGRAL TIME PID.GR R W
The parameter shows and sets the integral cooling time.
Unit of measurement: Minutes
Options: 0.00...99.99
4.14.9. C.DT - Derivative cooling time
Acronym Scrolling message Submenu Attributes
C.DT COOLING DERIVATIVE TIME PID.GR R W
The parameter shows and sets the derivative cooling time.
Unit of measurement: Minutes
Options: 0.00...99.99
4.14.10. C.P.HI - Maximum limit of cooling power
Acronym Scrolling message Submenu Attributes
C.P.HI COOLING POWER HIGH LIMIT PID.GR R W
The parameter shows and sets the maximum limit of cooling power.
Unit of measurement: %
Options: 0.0...100.0
To Next Page
Loading...
Need help?
General
