93
4. CONFIGURATION
4.14.1. PID.G.R - Selecting the parameter group to be configured
Acronym Scrolling message Submenu Attributes
PID.G.R PID PARAMETERS GROUP NUMBER PID.GR R W
The parameter shows and sets the parameter group to be configured, identified by its number.
Unit of measurement: Number
Options: 1...PD.G.N = Numerical identification where PID.G.N is the total number of groups of parame-
ters set on the MODE submenu
4.14.2. H.PB - Proportional heating band or hysteresis in ON-OFF control
Acronym Scrolling message Submenu Attributes
H.PB HEATING PROPORTIONAL BAND OR ON/OFF HYST PID.GR R W
The parameter shows and sets the proportional heating band or hysteresis in the ON-OFF control, calculated as a per-
centage of full scale of the main input.
Unit of measurement: %
Options: 0.0...999.9
4.14.3. H.IT - Integral heating time
Acronym Scrolling message Submenu Attributes
H.IT HEATING INTEGRAL TIME PID.GR R W
The parameter shows and sets the integral heating time.
Unit of measurement: Minutes
Options: 0.00...99.99
4.14.4. H.DT - Derivative heating time
Acronym Scrolling message Submenu Attributes
H.DT HEATING DERIVATIVE TIME PID.GR R W
The parameter shows and sets the derivative heating time.
Unit of measurement: Minutes
Options: 0.00...99.99
4.14.5. H.P.HI - Maximum heating power
Acronym Scrolling message Submenu Attributes
H.P.HI HEATING POWER HIGH LIMIT PID.GR R W
The parameter shows and sets the maximum limit of heating power.
Unit of measurement: %
Options: 0.0...100.0
To Next Page
Loading...
Need help?
General
