gefran 650 User Manual

80208G_MHW_650-1250-1350_01-2017_ENG
48
4.4.6. xxxxx - Model of controller
Acronym Scrolling message Submenu Attributes
xxxxx MODEL INFO R
The parameter shows the model of the controller.
xxxxx indicates the controller model (650LV, 650HV, 1250LV, 1250HV, 1350LV, 1350HV).
Unit of measurement: -
Options: 650.LV = 650 controller powered at 20...27 VAC/VDC
650.HV = 650 controller powered at 100...240 VAC/VDC
125.LV = 1250 controller powered at 20...27 VAC/VDC
125.HV = 1250 controller powered at 100...240 VAC/VDC
135.LV = 1350 controller powered at 20...27 VAC/VDC
135.HV = 1350 controller powered at 100...240 VAC/VDC
4.4.7. xxxxx - Type of controller
Acronym Scrolling message Submenu Attributes
xxxxx MODEL OPTION INFO R
The parameter shows the type (xxxxx) of function of the controller.
Unit of measurement: -
Options: CONTR = The device functions only as a controller
PROGR = The device functions as a programmer and controller
VALVE = The device functions as a controller with valve control
PR+VA = The device functions as a programmer and controller with valve control
4.4.8. L.FUNC - Option Logic Functions available
Acronym Scrolling message Submenu Attributes
L.FUNC LOGIC FUNCTION AVAILABLE INFO R
If present, this parameter indicates that the controller option is installed Logic Functions.
Unit of measurement: -
Options: -
4.4.9. IN.SPR - Remote setpoint input available
Acronym Scrolling message Submenu Attributes
IN.SPR REMOTE SETPOINT AVAILABLE INFO R
If present, the parameter indicates that the remote setpoint input is installed on the controller.
Unit of measurement: -
Options: -
4.4.10. OUT.A1 - Analog output 1 available
Acronym Scrolling message Submenu Attributes
OUT.A1 ANALOG OUTPUT AVAILABLE INFO R
If present, the parameter indicates that the analog output in voltge or current is installed on the controller.
Unit of measurement: -
Options: -
4. CONFIGURATION

gefran 650 Specifications

General

Brand	gefran
Model	650
Category	Temperature Controller
Language	English