95
4. CONFIGURATION
4.14.11. C.P.LO - Minimum limit of cooling power
Acronym Scrolling message Submenu Attributes
C.P.LO COOLING POWER LOW LIMIT PID.GR R W
The parameter shows and sets the minimum limit of cooling power.
For details, see paragraph “4.13.9. H.IT – Integral heating time” on page 87.
Unit of measurement: %
Options: 0.0...100.0
4.14.12. PV.THR - Threshold PV for the activation of the group of PID parameters
Acronym Scrolling message Submenu Attributes
PV.THR PV BEYOND WHICH IS ACTIVE PARAMETER GROUP PID.GR R W
The parameter shows and sets the PV over which the group of PID parameters is active.
Unit of measurement: Scale points of main input
Options: LO.SCL...HI.SCL