Gilera GP 800 i.e. User Manual

- Position the belt.
- Unscrew until the tool frees from the half-pulley
and remove it.
Refitting the driven pulley
- Fit the driving belt in the driven pulley with the
specific tool.
- Fit the assembled unit on the shaft.
See also
Refitting the clutch
Drive-belt
- Make sure the driving belt is not damaged and does not show abnormal wear.
- Replace as indicated in the scheduled maintenance table.
GP 800 i.e. Engine
ENG - 15

Gilera GP 800 i.e. Specifications

General

Brand	Gilera
Model	GP 800 i.e.
Category	Scooter
Language	English