Gilera GP 800 i.e. User Manual

- Remove the filter.
For filter cleaning:
- Wash the sponge with water and mild soap.
- Dry it with a clean cloth and short blasts of compressed air.
- Soak it in a mixture of 50% petrol and 50% specific oil.
- Gently squeeze the filtering element with your hands without wringing it; let it drip dry and then refit.
Recommended products
AGIP FILTER OIL Air filter
Mineral oil with specific tackifier additive ISO VG 150
Engine oil
In 4T engines, the engine oil is used to lubricate the distribution elements, the bench bearings and the
thermal group. An insufficient quantity of oil can cause serious damage to the engine.
In all 4T engines, the deterioration of the oil characteristics, or a certain consumption should be con-
sidered normal, especially if during the run-in period. Consumption levels in particular can be influenced
by the conditions of use (e.g.: oil consumption increases when driving at "full throttle".
Replacement
Replace oil and filter as indicated in the scheduled maintenance table.
In order to facilitate oil drainage, remove lid «A»
and loosen the cap/dipstick «B».
GP 800 i.e. Maintenance
MAIN - 9

Gilera GP 800 i.e. Specifications

General

Brand	Gilera
Model	GP 800 i.e.
Category	Scooter
Language	English