Gilera GP 800 i.e. - Front Fork Overhaul

Overhaul
- Support the fork in a vice.
- Loosen the three screws tightening the stem sup-
porting clamp.
- Unscrew the stem closing cap and slide off the
fork leg together with the stem from the relevant
support.
CAUTION
THE STEM CLOSING CAP KEEPS THE MAIN
SPRING PRELOADED. KEEP THE CAP PROP-
ERLY FITTED DURING THE REMOVAL FINAL
STAGE TO AVOID ACCIDENTS.
- Support the fork leg properly, remove the main
spring and drain off the fork leg oil.
- Remove the screw fixing the hydraulic rod with
the specific sealing gasket:
- Lock hydraulic rod rotation using the specific tool.
- Undo the fixing screw and collect the copper
washers.
Specific tooling
020632Y 22-mm Hexagonal spanner
Suspensions GP 800 i.e.
SUSP - 10