- Lubricate the stem closing cap O-ring.
- Preload the spring; fit the closing cap and tighten
to the prescribed torque.
Locking torques (N*m)
Fork locking screws cap 35 - 55
- Repeat the procedure for the other fork leg.
N.B.
IF BOTH FORK LEGS ARE SERVICED AT THE SAME TIME, BE CAREFUL NOT TO INVERT THE
RIGHT FORK LEG WITH THE LEFT ONE.
Steering column
Removal
- Remove the front wheel.
- Undo the screw indicated and remove the brake-
force distribution mechanism from the fork.
GP 800 i.e. Suspensions
SUSP - 17