Honda PCX150 2013 User Manual

FRONT WHEEL/SUSPENSION/STEERING
TOOLS
Remover head, 12 mm
077 46-0050300
Attachment, 32 x 35 mm
07746-001
01 00
Attachment, 45 x 50 mm
07946-6920100
Ball race remover shaft
07GMD-KS40100
17-4
Bearing remover shaft
077 46-0050100
Pilot,
12 mm
077 46-0040200
Pin spanner
07702-0020001
Ball race remover, 34.5
mm
07948-4630100
or 07736-A010008 (U.S.A. only) and a
3/8 x 16 thread slide hammer
commercially available
in U.S.A.
Driver
07749-0010000
Oil seal remover
07748-0010001
/.~
~,
(·
or equivalent commercially available in
U.S.A.
Socket wrench
07916-KM10000
Attachment, 35.2 mm I.D.
0794 7-KA20200
(Not available
in U.S.A.)

Honda PCX150 2013 Specifications

General

Displacement	153 cc
Bore x Stroke	58.0 mm x 57.9 mm
Compression Ratio	10.6:1
Transmission	Automatic V-Matic belt drive
Front Tire	90/90-14
Rear Tire	100/90-14
Wheelbase	51.8 inches
Fuel System	PGM-FI
Ignition	Fully transistorized
Front Suspension	Telescopic fork
Rear Suspension	Unit swing
Front Brake	Hydraulic disc
Rear Brake	Drum
Fuel Capacity	2.1 gallons
Engine Type	Liquid-cooled, 4-stroke, SOHC, single-cylinder
Curb Weight	286 lbs (130 kg)