Honda PCX150 2013 User Manual

REMOVAL ('13 MODEL)
• If the sensor unit has been removed, perform the TP
sensor reset procedure (page
7-21
).
[2]
Remove the luggage box (page 2-25).
Loosen the throttle cable lock nut
[1
].
Disconnect the throttle cable
[2]
from the cable bracket
[3]
and throttle drum
[4].
Disconnect the sensor unit
SP
(Black) connector
[5]
and
IACV 4P (Black) connector
[6].
Loosen the connecting hose band screw
[1]
and
insulator band bolts [2].
Remove the throttle body [3].
• Seal the intake pipe with a shop towel or cover it
with a piece
of
tape
to
prevent any foreign material
from dropping into the engine.
REMOVAL (AFTER '13 MODEL)
Remove the luggage box (page 2-25).
Loosen the throttle cable nuts [1].
Disconnect the throttle cables
[2]
from the cable bracket
[3]
and throttle drum [4].
Disconnect the sensor unit
SP
(Black) connector
[5]
and
IACV 4P (Black) connector [6].
Loosen the connecting hose band screw
[1]
and
remove the intake pipe bolts [2].
Remove the throttle body [3].
Seal the intake pipe with a shop towel or cover
it
with a piece
of
tape
to
prevent any foreign material
from dropping into the engine.
[1]
SYSTEM
[4]
[5]

Honda PCX150 2013 Specifications

General

Brand	Honda
Model	PCX150 2013
Category	Scooter
Language	English