F
FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION ('13
MODEL)
Remove the following:
- Front grille (page 2-5)
- Inner cover (page 2-13)
- Body cover (page 2-23)
Left side:
Disconnect the left front turn signal light
2P
(Black)
connector [1].
Right side:
Disconnect the right front turn signal light
2P
connector
[2].
Remove the six screws [3] and two screws/washers [4].
Remove the front cover [5] by releasing the following:
- Tab
[6]
from the groove
of
the headlight unit
- Hooks [7] from the slots of the floor step
Installation is
in
the reverse order
of
removal.
Left side:
Right side:
[6]
[3]
To Next Page
Loading...
Need help?
General
