Honda PCX150 2013 User Manual

FRONT WHEEL/SUSPENSION/STEERING
INSTALLATION
• Always replace the steel balls and races as a set.
LOCK
NUT
-~1'.'t:1:11 : Grease with extreme pressure agent
(recommended: EXCELIGHT EP2
manufactured by KYODO YUSHI, japan
or Shell ALVANIA EP2 or equivalent)
TOP THREAD \
~ UPPER INNER RACE.
--==-----c:- I
LOWER BEARING (29)
DUST SEAL
I
STEERING STEM
Apply 3 - 5 g of grease with extreme pressure agent
(recommended: EXCELIGHT EP2 manufactured by
KYODO YUSHI, japan or Shell ALVANIA EP2 or
equivalent)
to the lower bearing races.
Attach the steel balls
(29 balls) [1] to the lower bearing
outer race.
Insert the steering stem [2] into the steering head pipe,
being careful not to drop the steel balls.
Apply 3 - 5 g of grease with extreme pressure agent
(recommended: EXCELIGHT EP2 manufactured by
KYODO YUSHI, japan or Shell ALVANIA EP2 or
equivalent)
to the upper bearing races.
Install the steel balls (23 balls) [1] onto the upper
bearing outer race.
Install a upper bearing inner race [2] onto the stem.
~"",
I
LOWER OUTER RACE
0
1

Honda PCX150 2013 Specifications

General

Brand	Honda
Model	PCX150 2013
Category	Scooter
Language	English