::!
LIGHTS/METERS/SWITCHES
After '13 model: Remove the fuel pump unit (page 7-10).
21-20
Measure the resistance between the connector
terminals at the float upper (full) and lower (empty)
positions.
CONNECTION:
A-
B
FLOAT POSITION
FULL
EMPTY
RESISTANCE
5-11
n
265-275
n
Replace the fuel level sensor if it
is
out of specification
(page 21-20).
FUEL LEVEL SENSOR REMOVAL/
INSTALLATION
Remove the fuel pump unit (page 7-10).
Disconnect the fuel level sensor Red and Black wire
connectors.
Release the wires from the guides
[1]
of
the fuel pump
unit.
Remove the fuel level sensor
[1]
from the fuel pump unit
by releasing the three hooks [2].
Installation is
in
the reverse order of the removal.
Red
~~lack
~
[1]
[2]
To Next Page
Loading...
Need help?
General
