FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION
MODEL)
Unlock the seat with the seat opener.
Open the seat.
'13
Remove the two trim clips [1] and grab rail cover lid [2].
Remove the three screws [3].
Carefully pull up the front side
of
grab rail cover [4] and
release the two snap fit clips [5] and remove the grab
rail cover.
Installation is in the reverse order
of
removal.
L
REMOVAL/INSTALLATION ('13
MODEL)
Remove the grab rail cover (page 2-20).
Remove the four bolts [1].
Remove the grab rail [2] by releasing the bosses [3]
from the grooves
of
the body cover as shown.
Installation is
in
the reverse order
of
removal.
[1]
(l
[2]
[3]
~
1i)
ffi
[5]
1
To Next Page
Loading...
Need help?
General
