HP 9000 Series User Manual

FINAL TRIM SIZE : 7.0 in x 8.5 in
5
Mounting the New CD ROM Driv
e
SAM will mount the disc for y
ou when you install the driv
e. You can then
mount it and unmount it manually, using the mount and umount commands, as
with a exible disk.
If you have not already had SAM do so, in order for y
our system to bo ot with
the new CD ROM mounted, you will need to edit y
our /etc/checklist . Add
the following line to the
/etc/checklist le:
/dev/dsk/c201d2s0 /cdrom cdfs ro 0 0 # CD ROM
If you have only made this c
hange to your system, executing mount -a will
mount the new disk automatically, and it will stay mounted until you reb o ot
your system. (Note that using the -a option mounts al l unmounted devices in
/etc/checklist .)
After mounting a new disk on a directory,an ll listing of the directory should
giveyou at least one le or directory en
try.For example:
total 1024
drwxr-xr-x 2 root root 8192 Aug 31 15:24 lename
See the next section for information on unmounting the disc before you remove
it.
Removing and Inserting a Disc
You must mount a CD ROM disc every time you insert it into the drive, and
you must unmount the disc b efore the system will allowyou to eject it from
the drive.
Note
The eject button on the CD ROM drive is disabled while the
device is mounted or in use.
5-24 Configuring HP-UX for Printers and Drives DRAFT
2/5/97 11:31

HP 9000 Series Specifications

General

Brand	HP
Model	9000 Series
Category	Server
Language	English