HP 9000 Series User Manual

FINAL TRIM SIZE : 7.0 in x 8.5 in
5
Before you remove a disc:
1. For example, if the disc is designated b
y the blo ck device le
/dev/dsk/c201d2s0 , temp orarily unmount the disk's le system b
y
executing the following:
umount /dev/dsk/c201d2s0
2. Press the eject button to remo
ve the disk
After you insert a disk:
1. Mount the CD R
OM le system so that HP-UX will recognize it. If,
for example, you are mounting the CD ROM designated by the device
lename /dev/dsk/c201d2s0 , create a directory /cdrom (if it do esn't exist
already) and execute the follo wing:
mount /dev/dsk/c201d2s0 /cdrom
(Note that the directory /cdrom , in the example, must be given an
absolute path name).
In this example, the mount command announces to the system that a
removable le system is to be attached at the directory
/cdrom . This
directory b ecomes the name of the ro ot of the newly-moun
ted le system.
2. Nowyou can access the CD ROM as you would any other disk, except
that you cannot write to it.
3. A ashing busy light indicates normal activit
y with the system.
For More Information
For more information on the mount , umount , and reboot commands, please
see the appropriate entries in HP-UX Reference .You can also use your
online command help system bytyping man , follo wed by the name of the
command, and 4
Return
5 .
Information on the installation of external p eripheral devices can b e found in
Instal ling Peripherals .
DRAFT
2/5/97 11:31
Configuring HP-UX for Printers and Drives 5-25

HP 9000 Series Specifications

General

Brand	HP
Model	9000 Series
Category	Server
Language	English