Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
333
Product Specifications
Table 6-247 lists the product specifications of the 48-Port 100/1000Base-X-SFP Line
Processing Unit S.
Table 6-247 Product specifications of the 48-Port 100/1000Base-X-SFP Line Processing Unit S
Item
Specifications
Supported protocol
and service
Ethernet_II, Ethernet_SAP, Ethernet_SNAP
PTP
Interface type
SFP
Reliability and
availability
Hardware features:

Supporting hot swap
NMS
Enhanced command-line interface
Craft Works Interface (CWI)
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.14.4 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Line Processing Unit S(LPUS-51)
Overview
Figure 6-94 shows the appearance of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Line Processing Unit S(LPUS-51).HQoS is not supported on this board.
Port 0 and Port 1 can work in the LAN or WAN mode. Port 2 to Port 25 can work in the LAN
mode.
The 24-Port 100/1000Base-X-SFP can use the following optical modules:

GE optical module, providing features of GE optical interfaces

FE optical module, providing features of FE optical interfaces

Electrical interface SFP module, providing features of the 10 M/100 M/1000 M
auto-sensing electrical interfaces

Intermixing of the preceding modules

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English