Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
A List of Indicators
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
643
Indicator/Butto
n
Description
Ethernet
interface)
A.3.4 LPU Indicators
Table A-15 lists the status and descriptions of LPU indicators.
Table A-15 LPU indicators
Indicator
Color
Description
OFL indicator
Red
If the indicator is on, you can remove the board.
RUN indicator
Green

If the indicator blinks once every 2s (0.5 Hz), the
FPIC is in the normal state state.

If the indicator blinks twice every 1s (2 Hz), the FPIC
is in the alarm state.
Link/ACT
indicator
Green

If the indicator is off, the link is Down.

If the indicator is on, the link is Up.

If the indicator is blinking, data is being read or
written.
A.4 Indicators of NE40E-8
This chapter presents the indicators of NE40E-8.
A.4.1 Fan Module Indicators
The indicators of the fan module are on the LCD plastic panel. Table A-16 shows the status
and description of the indicators.
Table A-16 Indicators of the fan module
Indicator
Color
Description
RUN indicator
Green
If the indicator blinks (1Hz), the FAN and FCB work
normally.
ALM indicator
Red
If the indicator is on, the FAN or FCB works abnormally.
A.4.2 Power Module Indicators
The indicators of the power module are on the plastic panel of the power supply. Table A-17
shows the status and meaning of the indicators of the DC-input power module.

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English