EasyManuals Logo
Home>Huawei>Network Router>NetEngine40E

Huawei NetEngine40E Hardware Description

Huawei NetEngine40E
770 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
354
Item
Specifications
Short-term ambient temperatur-: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperat-re: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.15.5 2-Port Channelized OC-3c/STM-1c POS-SFP Flexible Card
Overview
Figure 6-109 shows the appearance of the 2-port channelized OC-3c/STM-1c POS-SFP FPIC.
Figure 6-109 Appearance of the 2-port channelized OC-3c/STM-1c POS-SFP FPIC
Panel
Figure 6-110 shows the panel appearance of the 2-port channelized OC-3c/STM-1c POS-SFP
FPIC. Table 6-277 describes the indicators on the panel.
Figure 6-110 Panel appearance of the 2-port channelized OC-3c/STM-1c POS-SFP FPIC
Table 6-277 Indicators on the panel of the 2-port channelized OC-3c/STM-1c POS-SFP FPIC
Indicator
Description
STATUS
indicator (green)
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
LINK/ACT
indicator(green)
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.

Table of Contents

Other manuals for Huawei NetEngine40E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei NetEngine40E and is the answer not in the manual?

Huawei NetEngine40E Specifications

General IconGeneral
BrandHuawei
ModelNetEngine40E
CategoryNetwork Router
LanguageEnglish

Related product manuals