Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
488
Item
Specifications
Board weight
About 7.0 kg ( 15.44 lb )
Dimensions (width x
depth x height)
399 mm x 551 mm x 41 mm ( 15.71 in. x 21.69 in. x 1.61 in. )
Connector type
LC
Earliest software version
V600R001
Product Specifications
Table 6-488 lists the product specifications of the 4-port 10GBase LAN/WAN-XFP Line
Processing Unit S.
Table 6-488 Product specifications of the 4-port 10GBase LAN/WAN-XFP Line Processing Unit
S.
Item
Specifications
Supported protocol
and service
IP
Interface type
Optical interface: LC
Reliability and
availability
Hardware feature

Supporting hot swap
NMS
Enhanced command-line interface
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.21.2 40-Port 100/1000Base-SFP Line Processing Unit S(LPUS-20)
Overview
Figure 6-172 shows 40-port 100/1000Base-SFP Line Processing Unit S. 1588v2 and HQoS
are not supported on this board.
The 40-port 100/1000Base-SFP Line Processing Unit S provides the following functions:

Provides GE optical interfaces through the GE optical module

Provides FE optical interfaces through the FE optical module

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English