Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
7 Cables
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
614
Table 7-17 Technical specifications of the chassis and cabinet ground cable
Item
Description
PGND cable
Terminal
Naked Crimping Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
Cable type
Wire,450/750V,60227 IEC 02(RV)25mm^2,yellow
green,110A,With a package exempted from fumigating
Fireproof class
CM
7.4 Console Port Cable
This section describes the structure and technical specifications of the console interface cable.
7.4.1 Introduction
The console interface cable is used to connect the console interface on the NE40E to the serial
interface of the console to transmit configuration data of the NE40E.
The console interface cable is an 8-core shielded cable. One end of the cable is an RJ45
connector connected to the console interface on the MPU. The other end has DB9 and DB25
connectors, either of which is connected to the serial interface on a computer.
7.4.2 Structure
Figure 7-1 shows the structure of a console interface cable. Table 7-18 shows the pin
assignment on the console interface cable.
Figure 7-1 Console interface cable
1. Direction
A
2. DB25 female
connector
3. Label
4. RJ45 connector
5. Direction
B
6. Direction C
7. DB9 female
connector
W1 and W2 communication
cable

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English