Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
C List of Interface Attributes
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
666
Table C-1 Interface attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45
Attributes
Description
Connector type
RJ45
Working mode
10M/100M/1000M auto-sensing and half-duplex and full-duplex
Cable specification
Super category 5 Shielded Twisted Pair (STP) cable is
recommended.
Frame format
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Network protocol
IP
C.2 Interface Attributes of 100Base-FX
Table C-2 lists the interface attributes of 100Base-FX.
Table C-2 Attributes of 100M SFP optical modules
Attributes
Description
Transmission
distance
2 km ( 1.24
mi. )
15 km ( 9.32
mi. )
40 km ( 24.86
mi. )
80 km ( 49.71
mi. )
Center wavelength
1310 nm
1310 nm
1310 nm
1550 nm
Minimum
transmitting power
-19.0 dBm
-15.0 dBm
-5.0 dBm
-5.0 dBm
Maximum
transmitting power
-14.0 dBm
-8.0 dBm
0 dBm
0 dBm
Receiving
sensitivity
-30.0 dBm
-31.0 dBm
-37.0 dBm
-37.0 dBm
Overload power
-14.0 dBm
-8.0 dBm
-10.0 dBm
-10.0 dBm
Optical fiber type
Multi-mode
Single-mode
Single-mode
Single-mode
C.3 Interface Attributes of 1000Base-X-SFP
Table C-3 lists the interface attributes of 1000Base-X-SFP.
Table C-3 Interface attributes of the 1000Base-X-SFP
Attributes
Description
Connector type
LC/PC
Interface attributes
Compliant with the selected SFP optical module. (For the
attributes of SFP modules, see Table C-4 .)

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English