Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
431
6.18.2 4-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit (LPUI-41)
The right-most two ports are numbered in the format of "slot number/0/port number" and the left-most
two ports are numbered in the format of "slot number/1/port number".
Overview
Figure 6-147 shows the appearance of the 4-port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit.
Figure 6-147 Appearance of the 4-port 10GBase LAN/WAN-XFP Integrated Line Processing
Unit
Panel
Figure 6-148shows the panel appearance of the 4-port 10GBase LAN/WAN-XFP Integrated
Line Processing Unit. Table 6-404 describes the indicators on the panel.
Figure 6-148 Panel appearance of the 4-port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Table 6-404 Indicators on the panel of the 4-port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Component
Description
OFL button
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about five
seconds till the OFL indicator is on.
OFL indicator
(red)
If the indicator is on, you can remove the board.
RUN indicator
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English