HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 7-2 Cables used when the power supply distance is longer than 15 m ( 49.21 ft ) and shorter
than 25 m ( 82.02 ft )
Naked Crimping Connector,JG2,25mm^2,M6,150A,Tin Plating,For OEM
Naked Crimping Terminal,OT,25mm^2,M8,Tin Plating,Naked Ring
Terminal
Wire,450/750V,227 IEC 02(RV)25mm^2,blue
Wire,450/750V,227 IEC 02(RV)25mm^2,black,110A
Power Supply Distance Longer Than 25 m ( 82.02 ft ) and Shorter Than 35 m
( 114.83 ft )
If the power supply distance is longer than 25 m ( 82.02 ft )and shorter than 35 m ( 114.83 ft ),
use the 35 mm^2 ( 0.05 in.^2 )power cable to connect the NE40E and the power distribution
cabinet. Table 7-3 lists the cable terminals and cable types.
Table 7-3 Cables used when the power supply distance is longer than 25 m ( 82.02 ft ) and shorter
than 35 m ( 114.83 ft )
Naked Crimping Connector,JG2,34.3mm^2,M6(1/4"),134A,Tin
Plated,2AWG,Hole Center Distance 15.875mm(5/8"),Short Tube,for
North American
Naked Crimping Terminal,OT,35mm^2,M8,Tin Plating,Naked Ring
Terminal
Wire,450/750V,227 IEC 02(RV)35mm^2,Blue,135A
Wire,450/750V,227 IEC 02(RV)35mm^2,black,135A
7.1.2 NE40E-X8 DC-Input Power Cable
If the power supply distance is longer than 35 m ( 114.83 ft ), you need to place the power
distribution cabinet near the NE40E. For cables to be selected, see Power Supply Distance
Shorter Than 15 m ( 49.21 ft ).
You need to prepare suitable cables according to the surveyed power supply distance between
the NE40E and the power distribution cabinet.
To Next Page
Loading...
Need help?
General
