Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
360
Item
Specifications
Connector type
LC
Earliest software
version
when the FPIC is used together with the LPUF-10,the earliest
software version is V300R006
when the FPIC is used together with the LPUF-50,the earliest
software version is V600R006C00
Product Specifications
Table 6-286 lists the product specifications of the 8-port OC-12c/STM-4c POS-SFP FPIC.
Table 6-286 Product specifications of the 8-port OC-12c/STM-4c POS-SFP FPIC.
Item
Specifications
Supported protocol
and service
PPP or HDLC
Interface type
SFP
Reliability and
availability
Hardware feature

Supporting hot swap
NMS
Enhanced command-line interface
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.15.7 8-Port 100/1000Base-X-SFP Flexible Card
A(P10-A,Supporting 1588v2)
Overview
Figure 6-113 shows 8-port 100/1000 Base-X-SFP Flexible Card A (Supporting 1588v2).
The 8-port 100/1000 Base-X-SFP Flexible Card A is called E8GFB for short. It is an flexible
card that supports IEEE1588v2. The E8GFB is applicable to the 10 G LPU (that is LPUF-10)
and supports the following interface modules:

GE optical module, providing features of GE optical interfaces

FE optical module, providing features of FE optical interfaces

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English