Serial Port Selection Menu
This menu allows you to enable or disable the call-in and call-out functions of each serial port in any
combination.
Serial Port Selection Menu
1. Serial Port 1 Call-Out: 3. Serial Port 1 Call-In:
Currently Disabled Currently Disabled
2. Serial Port 2 Call-Out: 4. Serial Port 2 Call-In:
Currently Disabled Currently Disabled
98. Return to Previous Menu
Call-in and ring-indicate power-on cannot be enabled at the same time. If ring-indicate power-on is already
enabled and you try to enable call-in, a message prompts you for confirmation. Refer to the message
displayed on the screen.
Serial Port Speed Setup Menu
This menu allows you to set serial port speed to enhance terminal performance or to accommodate
modem capabilities.
Serial Port Speed Setup Menu
1. Serial Port 1 Speed:
Currently 9600
2. Serial Port 2 Speed:
Currently 9600
98. Return to Previous Menu
1>
A serial port speed of 9600 baud or higher is recommended. Valid serial port speeds are as follows:
50 600 4800
75 1200 7200
110 1800 9600
134 2000 19200
150 2400 38000
300 3600 57600
115200
382 Service Guide
To Next Page
Loading...
Need help?
General