Display Error Log
A screen similar to the following displays when you select this option. You can view or clear your system
error log.
.--------------------------------------------------------.
| Error Log |
| |
| |
| Date Time ErrorCode Location |
| Entry 1. 99/06/30 02:15:35 25a80011 U1.1-P1.1/Q1 |
| Entry 2. 99/07/01 03:18:36 20300026 U1.1-P1.1/Q1 |
`--------------------------------------------------------’
.-----------------. .-----------.
|C=Clear Error Log| |X=Exit Log |
`-----------------’ `-----------’
Note: The time stamp in this error log is Coordinated Universal Time (UCT), which is also referred to as
Greenwich Mean Time (GMT). The AIX error log has more information available and time stamps
with your local time.
Remote Initial Program Load Setup
This option allows you to enable and set up the remote startup of your system. You must first specify the
network parameters as shown in the following screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
`------’
===>
Note: Some applications may require that IP addresses contain leading zeroes for numbers less than
100. For example, 129.132.4.20 may need to be entered as 129.132.004.020.
Chapter 9. Using System Management Services 403
To Next Page
Loading...
Need help?
General