Kubota G2000 4WS User Manual

G1700-G1800-G1900-G2000 WSM,10835 5.1 ENGINE
TIGHTENING TORQUES
Tightening torques of screws and nuts on the table below are especially specified.
(For general
use screws and nuts: See page S.G-3)
Item
N'm kgf'm
ft-Ibs
Drain plug
32.4
to 37.3
3.3
to 3.8 23.9 to 27.5
Starter B
terminal nut
9.8 to 13.7
1.0
to 1.4
7.2
to 8.7
Exhaust
manifold mounting screw
and
nut
12.26
to 14.22
1.25
to 1.45
9.04
to 10.49
Drive shaft
mounting screw 19.6t029.4
2.0to 3.0
14.5
to 21.7
Engine support mounting screw 39.2 to 53.9
4.0
to 5.5 28.9 to 39.8
Spark plug
19.6t024.5
2.0to 2.5 14.5to 18.1
* Cylinder head cover cap nut 3.9 to 5.9 0.4 to 0.6 2.9t04.3
* Rocker arm bracket mounting nut 9.81 to 11.28 1.00 to 1.15
7.23
to 8.32
* Cylinder head screw
37.3
to 42.2
3.8
to 4.3 27.5t031.1
* Fan drive pulley mounting screw 98.1 to 107.9 10.0to 11.0 72.3 to 79.6
Gear case mounting screw
9.81 to 11.28
1.00to 1.15 7.23 to 8.32
* Idle gear shaft mounting screw
9.81 to 11.28
1.00
to 1.15 7.23 to 8.32
Oil pan
mounting screw
9.81 to 11.28
1.00
to 1.15 7.23 to 8.32
* Connecting rod screw
26_5 to 30.4
2.7to 3.1 19.5t022.4
* Flywheel mounting screw
53.9
to 58.8 5.5to 6.0 39.8 to 43.4
Bearing
case cover mounting screw 9.81 to 11.28
1.00
to 1.15 7.23 to 8.32
* Bearing case screw 2
26.5
to 30.4
2.7
to 3.1 19.5t022.4
* Bearing case screw 1
12.7to 15.7
1.3
to 1.6 9.4 to 11.6
Oil pressure switch 14.7 to 19.6
1.5t02.0 10.8to 14.5
•
NOTE
• For * marked screws, bolts and nuts on the table, apply engine oil to their threads and seats before
tightening.
5.1-53
201

Kubota G2000 4WS Specifications

General

Brand	Kubota
Model	G2000 4WS
Category	Tractor
Language	English