KYMCO Dink 50 User Manual

6. CYLINDER HEAD/VALVES
6-3
DINK 50/ 125
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The cylinder head can be serviced with the engine installed in the frame. Coolant in the radiator
and water jacket must be drained first.
• When assembling, apply molybdenum disulfide grease or engine oil to the valve guide movable
parts and valve arm sliding surfaces for initial lubrication.
• The valve rocker arms are lubricated by engine oil through the cylinder head engine oil passages.
Clean and unclog the oil passages before assembling the cylinder head.
• After disassembly, clean the removed parts and dry them with compressed air before inspection.
• After removal, mark and arrange the removed parts in order. When assembling, install them in
the reverse order of removal.
SPECIFICATIONS(DINK 125)
Unit: mm (in)
Item
Standard
Service Limit
IN 0.1
(
0.004
)
⎯
EX 0.1
(
0.004
)
⎯
Cylinder head compression pressure 15 kg/cm²(1500 kpa, 213 psi) ⎯
Cylinder head warpage ⎯ 0.05 (0.002)
IN 30.8763
(
1.235052
)
30.75
(
1.23
)
EX 30.4081
(
1.216324
)
30.26
(
1.2104
)
IN 10～10.018
(
0.4～0.40072
)
10.1
(
0.404
)
EX 10～10.018
(
0.4～0.40072
)
10.1
(
0.404
)
Valve rocker arm shaft IN 9.972～9.987
(
0.39888～0.39948
)
9.9
(
0.396
)
O.D. EX 9.972～9.987
(
0.39888～0.39948
)
9.9
(
0.396
)
IN 4.99～4.975
(
0.1996～0.199
)
4.925 0.197
)
EX 4.97～4.955
(
0.1988～0.1982
)
4.915
(
0.1966
)
IN 5～5.012
(
0.2～0.20048
)
5.03
(
0.2012
)
EX 5～5.012
(
0.2～0.20048
)
5.03
(
0.2012
)
Valve ste
m
-to-
g
uide IN 0.01～0.037
(
0.0004～0.00148
)
0.08
(
0.0032
)
clearance EX 0.03～0.057
(
0.0012～0.00228
)
0.1
(
0.004
)
clearance
EX
Valve clearance (cold)
Camshaft cam height
Valve rocker arm I.D.
Valve stem O.D.
Valve guide I.D.

KYMCO Dink 50 Specifications

General

Brand	KYMCO
Model	Dink 50
Category	Scooter
Language	English