14.HANDLEBAR/FRONT WHEEL/FRONTBRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
14-10
DINK 50/125
DISASSEMBLY
Remove the side collar (1) and dust seal (2).
Turn the inner race of each bearing with your
finger to see if they turn smoothly and quietly.
Also check if the outer race fits tightly in the
hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.
Remove the front wheel bearing (3) by using
the special tool.
Special tool:
Bearing puller A120E00037
Remove the distance collar (4) from wheel.
To Next Page
Loading...
Need help?
General
