KYMCO Dink 50 User Manual

8 . DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-32
DINK 50/125
Remove the seal collar.
Pull out the guide roller pins from the driven
pulley and then remove the O-rings and oil
seal from the driven pulley.
CLUTCH/DRIVEN PULLEY
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 107.5mm replace if below
Seal Colla
r
O-rings
Guide Roller Pin
Driven Pulley

KYMCO Dink 50 Specifications

General

Brand	KYMCO
Model	Dink 50
Category	Scooter
Language	English