14.HANDLEBAR/FRONT WHEEL/FRONTBRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
14-12
DINK 50/125
FRONT BRAKE FLUID
Check
Brake fluid:
Brake hose:
Cracks/wear/damage → Replace.
Apply the brake lever several times.
Fluid leakage → Replace.
Brake hose clamp:
Loosen → Tighten
FLUID REPLACEMENT/AIR
BLEEDING
Once the hydraulic system has been opened,
or if the brake feels spongy, the system must
bled. When using a commercially available
brake bleeder, follow the manufacturer’s
operating instructions.
● A contaminated brake disc or pad
reduces stopping power. Discard
contaminated pads and clean a
contaminated disc with a high quality
brake degreasing agent.
● Do not allow foreign material to enter
the system when filling the reservoir.
● Avoid spilling brake fluid on painted,
plastic or rubber parts. Place a rag over
these parts whenever the system is
serviced.
＊
To Next Page
Loading...
Need help?
General
