KYMCO Dink 50 User Manual

8 . DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-34
DINK 50/125
Drive in a new needle bearing into the driven
face with the mark facing up.
CLUTCH/DRIVEN PULLEY ASSEMBLY
First install the movable driven face onto the
driven face. Then, install the guide roller pins,
O-rings and a new oil seal.
Install the seal collar.
Seal Colla
r
O-rings
Guide Roller Pin
Driven Pulley
Bearing Driver Pilo
t

KYMCO Dink 50 Specifications

General

Brand	KYMCO
Model	Dink 50
Category	Scooter
Language	English