13. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
13-28
DINK 50/125
AIR CLEANER
REMOVAL/INSTALLATION
Remove the body cover (refer to the
“FRAME COVERS
REMOVAL/INSTALLATION” section in
the chapter 2).
Loosen the air cleaner clamp screw (1).
Disconnect the crankcase breather hose (2)
from the air cleaner.
Disconnect the transmission gear case
breather hose (3) from air cleaner.
Remove the three mounting bolts (4) and
then remove the air cleaner.
Installation is in the reverse order of
removal.
To Next Page
Loading...
Need help?
General
