2. EXHAUST MUFFLER/FRAME COVERS
2-6
DINK50/125
Remove the two bolts and rear spoiler stay.
Installation is in the reverse order of removal.
UPPER/LOWER HANDLEBAR COVER
Remove the six screws.
Remove the two screws, then remove the
upper handlebar cover.
Disconnect the throttle cable (refer to the
“CARBURETOR” section in the chapter 13),
then pull the throttle cable out from the lower
cover.
Remove the lower cover.
Installation is in the reverse order of removal.
To Next Page
Loading...
Need help?
General
