8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-11
DINK 50/125
Remove the movable drive face assembly.
Drive belt inspection
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 17.5mm (0.7 in)
Clutch out inspection
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 130.5 mm (5.22 in)
Movable Drive Face Assembl
To Next Page
Loading...
Need help?
General
